IPv4入口使用辦法|IPv4 Ingress Port Usage Print

  • 0

爲了方便第一次連入的用戶, 我們提供了IPv4 NAT. 

To facilitate first-time users, we provide IPv4 NAT.

免責聲明:
此IP若遭到通報, 將不再補貨. 您在下單之時, 我們從未應承提供任何IPv4入口.
此IP若遭到攻擊, 我們也不會處理. 如果您對SLA有高要求, 請移步至獨立IPv4.
禁止在對應端口上開立HTTP/HTTPS網站, 禁止掃描到首次關停v4入口, 再次將直接刪除機器, 並不提供退款.
禁止分享IP地址及其配套的域名解析, 禁止提供公共轉發. 如果因爲您的疏忽導致IP停權, 我們也不會對此進行補充.
世道艱難, 且用且珍惜.

如果您不同意上述條款, 請您關閉本頁面. 无法使用IPv4入口不能夠成爲爭議/退款理由. 

Disclaimer

  • No Replacements for Reported IPs: If this IP is reported for abuse, it will not be replaced. By placing an order, you acknowledge that we do not guarantee the provision of an IPv4 address.

  • No Attack Mitigation: We are not responsible for mitigating any attacks on this IP. If you require a high Service Level Agreement (SLA), please consider a dedicated IPv4 address.

  • Prohibited Activities & Consequences: The following are strictly prohibited:

    • Operating HTTP/HTTPS websites on the designated ports.

    • Scanning.

    • The first violation (scanning) will result in the suspension of your IPv4 access.

    • A second violation will lead to the termination of your machine without a refund.

  • No Sharing or Public Forwarding: Sharing the IP address or its associated DNS records, as well as providing public forwarding, is prohibited. We will not provide a replacement if the IP is suspended due to your negligence.

These are challenging times. Please use this service responsibly and with care.

If you do not agree to these terms, please close this page. The inability to use the IPv4 access is not a valid reason for a dispute or refund.

以下為使用辦法:  Usage Below:

1. 登錄您的VM控制面板, 看到有這串形如"v4*****.com"的東西, 複製下來, 這是公共IPv4的域名解析. 這是Address.

1. To log into your VM control panel, you'll see something like "v4*****.com." Copy this down—it's your public IPv4 domain resolution, or your address.

2. 您的端口查詢請訪問下面的地址進行查詢:

2. Check your ports at the link below:

https://tools.leikwanhost.com/port-calculator.html

網頁中填寫的IP地址請將控制面板下滑, 找到下面的樣式:

目前您只可以填寫下面的IP段. 

Now you can only use the IP ranges below:

10.7.0.2 - 10.7.2.254
10.8.0.1 - 10.8.3.254
10.3.0.1 - 10.3.10.254
10.4.0.1 - 10.4.0.254

 

3. 配合您的端口, 連接您的SSH. 其餘的端口為您的可用端口,進行直接映射.

3. Connect to your vm via SSH with ports you just check. Other ports are usable.


Was this answer helpful?

« Back